| Mechanical performance | Value | Units | Test method | ||||||
| Tensile strength | LW | 230-600 | Mpa | ASTM D-638 | |||||
| CW | 45-80 | ||||||||
| Tensile modulus | LW | 18-30 | Gpa | ASTM D-638 | |||||
| CW | 7-13 | ||||||||
| Flexural strength | LW | 300-700 | Mpa | ASTM D-790 | |||||
| CW | 80-120 | ||||||||
| Flexural modulus | LW | 20-26 | Gpa | ASTM D-790 | |||||
| CW | 7-12 | ||||||||
| Compressive strength | LW | 280 | Mpa | ASTM D-695 | |||||
| CW | 105 | ||||||||
| Compressive modulus | LW | 21 | Gpa | ASTM D-695 | |||||
| CW | 7.9 | ||||||||
| Interlayer shear strength | LW | 25 | Mpa | ASTM D-2344 | |||||
| Impact strength | 280 | KJ/M2 | ASTM D-256 | ||||||
| Physical property | Value | Units | Test method | ||||||
| Barcol Hardness | 50 | --- | ASTM D-495 | ||||||
| Water absorption（25℃,24h） | 0.2-0.5 | % | ASTM D-570 | ||||||
| Density | 1.75-2.00 | g/cm3 | ASTM D-792 | ||||||
| Coefficient of thermal expansion（LW） | 5.0 | 10-6/℃ | ASTM D-696 | ||||||
| Coefficient of thermal conductivity | 0.4 | W/(m.K) | ASTM C-518 | ||||||
| Elongation to break | 0.9 | % | ASTM D-638 | ||||||
| Electrical property | Value | Units | Test method | ||||||
| Arc resistance（LW） | 120 | seconds | ASTM D-495 | ||||||
| Dielectric constant（PF） | 5 | @60hz | ASTM D-150 | ||||||
| Dielectric strength（PF） | 8 | KV/mm | ASTM D-149 | ||||||
| Dielectric strength（LW） | 1.6 | KV/mm | ASTM D-149 | ||||||
| Surface resistance | 1015-1012 | Ω | ASTM D-257 | ||||||
| Volume resistance | 1015-1012 | Ω.cm | ASTM D-257 | ||||||
| Flammability property | Value | Units | Test method | ||||||
| Tunnel test | Max 25 | second | ASTM E-4 | ||||||
| Oxygen data | 25-28 | % | ASTM 2863 | ||||||
| 28-32 | |||||||||
| >32 | |||||||||
| Flammability classification | Self extinguish | ASTM D635 | |||||||
※ LW - lengthwise CW-crosswise PE=perpendicular to laminate face.
※ For more information, pls contact with Jinglue
※Your designed profiles are also available.